The Vision EV5-100T launch and line amplifier is designed for EV5 cascaded and radial multiswitch systems for amplifying satellite and terrestrial trunk cable signals.
It has four separate SAT IF amplifiers and one broadband terrestrial amplifier in a fully screened diecast housing for added interference immunity and is designed to filter 4G-800 LTE interference. Each model incorporates reliable switched attenuation and slope control on all five inputs. The terrestrial amplifiers use high quality push-pull technology for low distortion and high output capability.
The EV5-100T with built-in power supply can be used to power line powered systems including the LNB at up to 2A. It can be line powered via its input or output connectors or with a remote power supply (V5-034 recommended). Both models have LED indicators for power and fault indication.
Frequency Range SAT IF: 950-2400MHz
Frequency Range Terr: 47 -790MHz
Gain SAT / Terr: 22dB / 22dB
Gain Control/ Attenuation : 0 – 15dB 1dB steps
Slope Control SAT IF: 0 / 3 / 5 / 7dB
Slope Control Terr: 0 / 6 / 12 / 18dB
Isolation SAT / SAT: 30dB
Isolation SAT / Terr: 30dB
Noise Figure (typical): ≤9dB
Output IMD³-60dB (DIN45004B) Terr: 112dBμV
Output IMD³-35dB (EN50083-3) SAT IF: 114dBμV
External powering V Lines: 14V 0.5A switchable with LED indicator
External powering H Lines: 18V 2.0A switchable with LED indicator
External powering Terr Lines: 12V 0.1A switchable with LED indicator
DC Pass switchable via H Lines: 2A max when load is shared on H:Lo & H:Hi
Power consumption: 230V AC 50Hz 7w without external load
LED indicators: Green: 12V on | 18V on | 14V on / Red: overload/SC
Dimensions (mm): 284 x 135 x 52
Weight: 1.0kg
